Avaya 1000 Series Video Conferencing Systems Guía de usuario Pagina 18

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 111
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 17
Avaya Video Conferencing Manager Deployment Guide 18
Community Strings
By default Avaya Video Conferencing Manager uses SNMP to show detailed information about a
discovered device, such as its make, model, and software version. The community string is a password
used to access the device when you are sending SNMP traps. If the community string is correct, the device
responds with the requested information. If the community string is incorrect, the device discards the
request and does not respond. The default value of the community string is public. To change the default
value, follow these steps:
1. On the navigation bar, click .
2. In the section that pertains to the SNMP version that you use on your network, select the make of the
third party device.
3. Enter a value for Community String for SNMP v1 or v2, or enter a Username for SNMP v3 or other
protocols.
4. Click Add (SNMP v1 or v2) or Add User (SNMP v3).
Discovering Devices
After you configure default passwords for device management, follow these steps to discover and begin
managing devices in Avaya Video Conferencing Manager:
1. Access Avaya Video Conferencing Manager.
2. On the navigation bar, click .
3. In Actions, click Discover devices and then click Submit.
4. Discover a single device or discover devices in a range of IP addresses.
- To discover a single device, choose Single IP in Search By. Enter the IP address in the IP
Address box.
- To discover devices in a range of IP addresses, choose IP Range in Search By. Enter the IP
address range in the From and To boxes.
NOTE A large range of IP addresses may cause a delay due to network latency. You
can continue to interact with the Avaya Video Conferencing Manager interface
during this process. For best results, limit the range to a maximum of 255.
5. Start managing once discovered, the default, enables Avaya Video Conferencing Manager to
attempt to log in to and maintain communication with a device after discovering it. This option also
enables you to manage the device through Avaya Video Conferencing Manager. Consider clearing this
checkbox if you have fewer licenses in Avaya Video Conferencing Manager than devices on your
network; or you do not wish to manage certain devices in Avaya Video Conferencing Manager.
Vista de pagina 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 110 111

Comentarios a estos manuales

Sin comentarios