
Configuring IP Multicasting and Multimedia Services
A-6 117355-A Rev. A
Parameter: Pruning Enable
Path: Configuration Manager > Protocols > IP > Multicast > DVMRP > Global
Default: Enable
Options: Enable
| Disable
Function: Enables or disables pruning functionality on the router.
Instructions: DVMRP performs route pruning by default. If you want to disable this function
on the router, select Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.1.15
Parameter: Max Routes
Path: Configuration Manager > Protocols > IP > Multicast > DVMRP > Global
Default: 0
Options: 0 or an integer
Function: Specifies the number of routes that DVMRP can learn per slot. This parameter
limits the number of routes that can be stored in the routing table.
Instructions: If you want DVMRP to store all learned routes in the routing table, use the
default, 0. If you specify a maximum number of routes, you must include a
route for every local network that has a circuit configured for multicasting.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.1.17
Parameter: Policy Enable
Path: Configuration Manager > Protocols > IP > Multicast > DVMRP > Global
Default: Disable
Options: Enable
| Disable
Function: Enables and disables route policy functionality at the global level.
Instructions: Set this parameter as required.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.1.18
Comentarios a estos manuales