
Reserving Line Resources
117355-A Rev. A 8-11
Specifying the Unreserved Queue Length
If the Unreserved Policing Algorithm parameter is set to Queue Limit, you can
specify the maximum number of unreserved (best-effort) packets to be held in
queue for transmission. After the queue length reaches this value, the router
discards best-effort traffic when congestion occurs.
Note that priority queuing limits, if configured, override the value of this
parameter.
By default, LRM holds a maximum of 20 unreserved packets in queue for
transmission. Change this value to adjust the queue length limit from 0 to
214748364 packets (limited by available buffers).
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
click on any connector for a line that is
configured for RSVP.
The Edit Connector window opens.
2. Click on Edit Line Resources in the Edit
Connector window.
The Edit Line Resources window opens.
3. Set the Unreserved Queue Length
parameter. Click on Help or see the
parameter description on page A-26.
4. Click on OK. You return to the Configuration Manager
window.
Comentarios a estos manuales