Avaya Configuring Differentiated Services Manual de usuario descargar pdf (Pagina 81)

Configuration Examples

308620-14.00 Rev 00

B-7

Configuring the Router

For the network in Figure B-2, you must configure a static traffic filter on the

router.

The tables provide instructions on how to access the appropriate Site Manager

windows and configure the specific filter parameters. Only those parameters that

you must change from the default value are listed. If a parameter is not included, it

means that you can accept the default value.

The traffic filter that you need to configure uses the DS police action. After you

configure the DS police action, the router will know how to mark packets for

transmission through the network to the client.

Configure a Differentiated Services Interface

To configure a differentiated services interface on BLN 1, complete the following

tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on an IP interface connector.

The Add Circuit window opens.

2. Accept the default circuit name or enter a

new name, then click on

The Select Protocols window opens.

3. Scroll through the list of protocols and

choose

DiffServ

, then click on

The IP Configuration window opens.

4. Enter

192.32.9.7

in the

IP Address

parameter, then click on

The DiffServ Interface List window opens.

The interface is now enabled.

5. Click on

. You return to the DiffServ Interface List

window.

6. Keep the DiffServ Interface List window

open and go to the next section.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86

Sin comentarios

Avaya Configuring Differentiated Services Manual de usuario Pagina 81