Avaya Configuring Differentiated Services Manual de usuario descargar pdf (Pagina 31)

Starting Differentiated Services

308620-14.00 Rev 00

2-5

Enabling Static Filters

If your network does not use a bandwidth broker, you need to manually configure

filters on the router.

When you create traffic filters, it is important to understand the difference

between a traffic filter template and an actual traffic filter. A filter template is a

reusable, predefined specification for a traffic filter. You create an actual traffic

filter when you apply a filter template to a configured router interface. You can

apply a single template to as many interfaces as you want.

Each template must contain filter criteria and filter actions (log, drop, accept, set

DS field, set DS police). The actions are performed on the filtered packets.

Creating a Filter Template

To configure a differentiated services filter template, complete the following tasks:

Note:

Log is the only action that you can combine with other actions. For

example, you cannot combine Set DS Field and Set DS Police for one filter.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

DiffServ

. The DiffServ menu opens.

4. Choose

Interfaces

. The DiffServ Interface List window opens.

5. Select the interface you want to modify,

and click on

Traffic Filt

The DiffServ Static Filters window opens.

6. Click on

Template

. The Filter Template Management window

opens.

7. Click on

Create

. The Create DiffServ Template window

opens.

8. Enter a name for the template in the

Filter

Name

field.

(continued)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 85 86

Comentarios a estos manuales

Sin comentarios

Avaya Configuring Differentiated Services Manual de usuario Pagina 31

Comentarios a estos manuales

Relacionado con productos y manuales para Manuales de software Avaya Configuring Differentiated Services