
Configuring Differentiated Services
A-18
308620-14.00 Rev 00
For the filter criteria, the URL string criterion is unique to differentiated services.
For the filter criteria, you can add the following actions:
•Log
•Drop
• Accept
• Set DS Field
• Set DS Police
DS Field
If you add the action Set DS Field, the DS Field window opens (Figure A-9). The
DS field specifies the marking of the DS field in the IP packet header. The range
can be 00000000 to 11111111, which is 0 to 255 expressed in binary form.
Figure A-9. DS Field Window
RFC 2474 defines specific guidelines for configuring the DS field. Six bits of the
DS field are used to select the per-hop behavior of a packet as it travels through
each node. The last two bits of the field are currently unused. The value of these
two bits are ignored by differentiated services-compliant nodes when determining
the per-hop behavior to apply to a packet.
Note:
Log is the only action that you can combine with other actions. For
example, you cannot combine Drop and Set DS Field.
Comentarios a estos manuales