Avaya R2 Guía de instalación descargar pdf (Pagina 88)

Installing the Data Module, Hardware Key, and Remote Maintenance Line

Chapter 3

Installing a Remote Maintenance Line 3-19

4. Connect the printer cable (if there is one) to the hardware key. See the

figure above.

5. Apply power to the PC.

6. Start up BCMS Vu Server.

Installing a Remote Maintenance Line 3

To perform remote maintenance using pcANYWHERE, you must install

either an analog station line from the DEFINITY system (if you use DID

extensions) or a central office line.

Test the line after you install it by connecting an analog telephone and

calling the telephone number. If the telephone rings and can be answered,

the analog line has been installed correctly.

Caution

After you install the hardware key, do not, under any

circumstances, remove it while BCMS Vu Server is running.

If you do so, BCMS Vu Server will come to a halt, and you

will have to attach the hardware key and restart the program.

BCMS Vu Server will not run if the hardware key is not

attached to its parallel port.

Note

Mark this line with the telephone number for future

reference.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 146 147

Sin comentarios

Avaya R2 Guía de instalación Pagina 88