Avaya R2 Guía de instalación descargar pdf (Pagina 62)

Administering the DEFINITY System and Configuring the Network

Configuring a Network 2-23

Chapter 2

If TCP/IP is installed, a window appears describing the

configuration. If TCP/IP is not installed, you receive an error

message. If you receive an error message, go into

Start/Settings/Control Panel/Network and add TCP/IP Protocol.

(You may need the Windows installation disk.)

❐ In the list of installed network components, highlight “Network

Adapter” and select Properties.

Driver Type: Enhanced mode [32 bit and 16

bit] NDIS driver*

Bindings: TCP/IP*

Advanced: Maximum Transmit Value*

Not Present or No*

❐ (Windows 95 or Windows 98)

Primary Network Logon Client for Microsoft

Networks**

❐ Configure Client for Microsoft Networks.

❐ Under “Logon Validation” leave the box unchecked and the

“Windows NT domain” field blank, unless this PC is part of

Windows NT domain.

❐ Do nothing to “Network logon options.”

❐ (Windows 95 or Windows 98) On the “Identification” tab

Note

In a multi-protocol environment, if TCP/IP is not the

primary protocol in Windows NT 4.0 or is not the default

protocol in Windows 95 or Windows 98, then a NetBIOS

connection to the VUSHARE can happen through another

protocol. Therefore, be sure that TCP/IP is the primary

protocol.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 146 147

Sin comentarios

Avaya R2 Guía de instalación Pagina 62