Avaya R2 Guía de instalación Pagina 24

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 147
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 23
Introduction
Chapter 1
Overview of the Installation 1-7
Overview of the Installation 1
The steps to complete the installation and setup of BCMS Vu Software R2
are:
1. Administer the DEFINITY system.
2. Administer the network (required for the DEFINITY ONE system) or
stand-alone PC, if any.
3. Install the data module if connecting to a DEFINITY System other than
DEFINITY ONE.
4. Install the hardware key on the Server PC.
5. Install the BCMS Vu Server software.
6. Install the BCMS Vu Client software.
7. Install the BCMS Vu Wallboard software if you are using wallboards.
8. Install the wallboard(s) if you are using any.
9. Configure BCMS Vu software.
10. Verify connectivity to the DEFINITY system.
11. Verify that acceptance criteria have been met.
The remaining chapters of the guide describe these steps.
Vista de pagina 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 146 147

Comentarios a estos manuales

Sin comentarios