
Editing SDLC Parameters
114053 Rev. A 4-19
SDLC Link Station Parameter Descriptions
Use the following descriptions as guidelines when you configure the parameters in
the SDLC Link Station Configuration window.
Parameter: Enable
Default: Enable
Options: Enable
| Disable
Function: Enables or disables the link station on the port.
Instructions: Enter Enable to enable the link station on the port; otherwise, enter
Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.7.5.1.2
Parameter: PU Name
Default: APPN link station name or the NAME portion of the NETID.NAME;
DLSw adjacent link station name
Options: Any valid 8-byte ASCII name
Function: Specifies the physical unit (PU) name of the adjacent link station. This
name uniquely identifies the adjacent link station for statistics and Alert
messages.
Instructions: Enter the 8-byte ASCII link station name.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.7.5.1.32
Comentarios a estos manuales