
Configuring SDLC Services
4-6 114053 Rev. A
SDLC Interface Parameter Descriptions
Use the following parameter descriptions to edit SDLC interface parameters.
Parameter: Enable
Default: Enable
Options: Enable
| Disable
Function: Enables or disables the SDLC interface to this WAN physical circuit.
Instructions: Select Enable if you disabled this SDLC interface and now want to
re-enable it on its associated WAN physical circuit.
Select Disable if you want to disable this SDLC interface on its associated
WAN physical circuit.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.7.2.1.2
Parameter: Port Name
Default: APPN port name or DLSw circuit name
Options: Any valid port name
Function: Defines the port name you want to assign to this SDLC interface.
Instructions: Enter the name of the port you want to assign to this SDLC interface. You
can use any combination of alphanumeric characters. We recommend you
use the same name assigned to the circuit on which you added SDLC, for
example, S51.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.7.2.1.4
Comentarios a estos manuales