Avaya Configuring SDLC Services Manual de usuario Pagina 47

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 74
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 46
Editing SDLC Parameters
114053 Rev. A 4-9
Parameter: Idle Line Timer
Default: 6000 milliseconds
Range: 1 through 65535
Function: Specifies the overall time used to determine whether a line is completely
inactive. This parameter operates with the Idle Line Retry Limit
parameter. It is intended for primary SDLC routers.
Instructions: Enter a value from 1 through 65535. Enter the maximum value, 65535, if
you never want to terminate sessions on the line, even if it is completely
inactive. If you enter a smaller value, the timer expires when no activity
occurs on the line for the specified number of milliseconds.
In large configurations with many SDLC connections, you should
increase this value to allow more time for data exchange.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.7.2.1.10
Parameter: Idle Line Retry Limit
Default: 20
Range: 1 through 65535
Function: Specifies the number of times to run the Idle Line Timer before failure.
This parameter operates with the Idle Line Timer parameter to provide the
overall idle timeout period.
Instructions: Enter a value from 1 through 65535, where 1 causes SDLC to generate an
outage after the first Idle Line Timer expires, and 65535 specifies an
unlimited retry count.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.7.2.1.11
Vista de pagina 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 73 74

Comentarios a estos manuales

Sin comentarios