Avaya Configuring PPP Services Manual de usuario Pagina 100

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 118
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 99
Configuring PPP Services
A-22 114068 Rev. A
Parameter: Inbound Link Quality
Path: Protocols > PPP > Interfaces > Lines
Default: 90 (percent)
Range: 0 through 100
Function: Specifies the minimum acceptable success rate (percentage) of packets the peer
router transmits and this router receives on this interface over the last 5 LQR
reporting periods. Use this parameter only when you enable the Link Quality
Protocol parameter.
Instructions: If the percentage drops below the inbound link quality you specify, the router
brings down the link until the percentage increases to an acceptable level.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.25
Parameter: Outbound Link Quality
Path: Protocols > PPP > Interfaces > Lines
Default: 90 (percent)
Range: 0 through 100
Function: Specifies the minimum acceptable success rate (percentage) of packets the
router transmits and the peer router receives on this interface. Use this
parameter only when you enable the Link Quality Protocol parameter.
Instructions: If the percentage drops below the outbound link quality you specify, the router
brings down the link until the percentage increases to an acceptable level.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.27
Vista de pagina 99
1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 117 118

Comentarios a estos manuales

Sin comentarios