Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario Pagina 66

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 82
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 65
Configuring Ethernet, FDDI, and Token Ring Services
A-10 117020-A Rev. A
Parameter: Duplicate Address Protocol
Path: Configuration Manager > FDDI Connector > Edit Line > Edit FDDI
Parameters > Expert > SMT Attributes > FDDI SMT Attributes
Default: Enable
Options: Enable
| Disable
Function: Implements an optional ANSI duplicate address test involving periodic
transmission of Network Service Address Network Interface Function (NSA
NIF) frames to the source.
Instructions: Accept the default, Enable, if you want to test for duplicate addresses. Specify
Disable if you do not want to test for duplicate addresses.
MIB Object ID: 1.3.6.1.4.1.18.3.4.15.1.3.1.18
Parameter: LLC Data Enable
Path: Configuration Manager > FDDI Connector > Edit Line > Edit FDDI
Parameters > Expert > MAC Attributes > FDDI MAC Attributes
Default: Enable
Options: Enable
| Disable
Function: Specifies whether the MAC is available to transmit and receive Logical Link
Control (LLC) Protocol Data Units (PDUs). If you accept Enable, the interface
to the MAC entity is available to exchange PDUs between the MAC and the
local LLC entity when the ring becomes operational. Setting this attribute does
not affect transferring and receiving MAC or SMT frame types.
Instructions: Accept the default, Enable, if you want the MAC available for transmitting and
receiving LLC PDUs; specify Disable if you do not want the MAC available for
transmitting and receiving LLC PDUs.
MIB Object ID: 13.6.1.4.1.18.3.4.15.2.3.1.17
Vista de pagina 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 81 82

Comentarios a estos manuales

Sin comentarios