Avaya Configuring AppleTalk Services Manual de usuario Pagina 98

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 128
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 97
Configuring AppleTalk Services
4-6 114048 Rev. A
Parameter: Network End
Default: 0
Range: 0 to 65279
Function: Specifies the upper boundary (maximum) of the range of network
numbers that are available for nodes to use on the network to which this
interface connects.
This parameter is used with the Network Start parameter to help define a
seed router. If you have not specified a Network Start, this parameter is
ignored.
Instructions: To configure this interface as a nonseed router, accept the default, 0.
To configure this interface as a seed router, specify the Network End
parameter as follows:
If this is the only seed router on the network, determine the network
range for this interface and enter the upper boundary network number
here.
If there are already seed routers on the network, enter the same
Network End value that is configured on all other seed routers.
MIB Object ID: 1.3.6.1.4.1.18.3.5.4.3.1#14
Vista de pagina 97
1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 127 128

Comentarios a estos manuales

Sin comentarios