Avaya Configuring AppleTalk Services Manual de usuario Pagina 91

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 128
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 90
Enabling AppleTalk Services
114048 Rev. A 3-11
3.
Enter the appropriate IP address in the Remote AURP IP Address field
and click on OK.
The AT AURP Interface Configuration window reappears.
4. Repeat Steps 2 and 3 to add additional remote peers to the AURP
connection.
5. Click on Done to exit the window.
For information on customizing AURP service or configuring AURP zone filter
lists, refer to Chapter 4.
Parameter: Remote AURP IP Address
Default: None
Options: Any valid 32-bit IP address
Function: Identifies the peer’s IP address for the AURP connection.
Instructions: Enter an IP address using dotted decimal notation.
MIB Object ID: 1.3.6.1.4.1.18.3.5.4.9.1.14
Vista de pagina 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 127 128

Comentarios a estos manuales

Sin comentarios