Avaya Configuring AppleTalk Services Manual de usuario Pagina 104

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 128
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 103
Configuring AppleTalk Services
4-12 114048 Rev. A
4. Click on Zone List.
The AT Zone Configuration window appears (Figure
4-4). It lists the zones
already configured for the router. You can add or delete zones from this
window.
Figure 4-4. AT Zone Configuration Window
5.
Click on Add.
6. Specify the zone name at the Zone Name parameter, using the following
parameter description as a guide.
7. Click on OK.
The AT Zone Configuration window now lists the zone you added.
8. Click on Done to exit the AT Zone Configuration window.
9. If you are configuring the AppleTalk router in dynamic mode, wait 10
minutes to allow all routers on the network to time out the network and
zone information from their zone information tables.
10. Set the Enable parameter to Enable.
11. Click on Apply.
Note: Do not add the Default Zone to the interface’s zone list.
Vista de pagina 103
1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 127 128

Comentarios a estos manuales

Sin comentarios