Avaya Bell Canada SIP Trunking Service with Business Communication Manager 450 Nota de aplicación descargar pdf (Pagina 4)

TD; Reviewed:

SPOC 3/15/2013

Solution & Interoperability Test Lab Application Notes

4 of 45

BCSIPTrkBCM

Calling Party Name presentation and Calling Party Name restriction.

Proper codec negotiation with G.711MU codec.

Proper media transmission using G.711MU codec.

Proper early media transmission using G.711MU codec.

Incoming and outgoing fax over IP using G.711MU codec.

DTMF tone transmission as out-of-band RTP events as per RFC 2833.

Voicemail navigation for incoming and outgoing calls.

CallPilot voicemail hosted on BCM450.

User features such as hold and resume, call waiting, call park, transfer, forward, and

conference.

Off-net call transfer using subsequent INVITE method.

Off-net call forward using Diversion method.

Find Me Follow Me (FMFM) twining to incoming calls to cellular.

Meet-me conferencing hosted on BCM450.

Response to OPTIONS heartbeat.

Response to incomplete call attempts and trunk errors.

Session Timers implementation.

Items are not supported by Bell Canada on the test environment or not tested as part of the

compliance testing, are listed as following:

Inbound toll-free and outgoing emergency calls (E911) are supported but were not tested

as part of the compliance testing because Bell Canada has not provided the necessary

configuration.

G.729 codec is not supported.

Fax over IP with T.38 codec is not supported.

Off-net calls transfer using REFER method is not supported.

Off-net call forward using History-Info method is not supported.

2.2. Test Results

Interoperability testing of Bell Canada with the Avaya SIP-enabled enterprise solution was

successfully completed with the exception of the observations/ limitations described below.

1. The BCM450 station resumes a held outgoing PSTN call causes the Calling Party

Number to change. After retrieving the held call, the BCM450 station displayed the

“VoIP Line00X” instead of the original Calling Party Number of PSTN party. This is a

known behavior of BCM450 with no available resolution at this time. This issue has low

user impact, it is listed here simply as an observation.

2. The BCM450 station which forwards an internal call to PSTN, displays the

improper Calling Party Number. Before the forwarded call being answered by PSTN

party, the BCM450 station displayed “Priv. OLI” > “PSTN Calling Party Number”. After

PSTN party answered the call, the display on the BCM450 station changed to “VoIP

Line00X”. It should display the Calling Party Number of PSTN party. This is a known

1 2 3 4 5 6 7 8 9 ... 44 45

Comentarios a estos manuales

Sin comentarios

Avaya Bell Canada SIP Trunking Service with Business Communication Manager 450 Nota de aplicación Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Bell Canada SIP Trunking Service with Business Communication Manager 450