Avaya Bell Canada SIP Trunking Service with Business Communication Manager 450 Nota de aplicación descargar pdf (Pagina 3)

TD; Reviewed:

SPOC 3/15/2013

Solution & Interoperability Test Lab Application Notes

3 of 45

BCSIPTrkBCM

1. Introduction

These Application Notes describe the steps to configure Session Initiation Protocol (SIP)

Trunking between Bell Canada SIP Trunking Service (Bell Canada) and an Avaya SIP-enabled

enterprise solution. The Avaya solution consists of Avaya Business Communication Manager 450

(BCM450) Release 6.0 and various Avaya endpoints.

Bell Canada SIP Trunking Service referenced within these Application Notes is designed for

enterprise business customers. Customers using Bell Canada SIP Trunking Service with the

Avaya SIP-enabled enterprise solution are able to place and receive PSTN calls via a broadband

WAN connection using SIP protocol. This converged network solution is an alternative to

traditional PSTN trunks such as analog and/ or ISDN-PRI.

Bell Canada applies Digest Authentication for outgoing calls from the enterprise. It uses

challenge-response authentication with a “401 Unauthorized” responding to each outgoing initial

INVITE to Bell Canada. The subsequent INVITE from the enterprise provides the

“Authorization” header with a configured user name and password. This credential is provided

by Bell Canada and configured on BCM450. This call authentication scheme as specified in RFC

3261 provides authentication for the SIP signaling.

2. General Test Approach and Test Results

DevConnect Compliance testing is conducted jointly by Avaya and DevConnect members. The

jointly-defined test plan focuses on exercising APIs and/or standards-based interfaces pertinent

to the interoperability of the tested products and their functionalities. DevConnect Compliance

testing is not intended to substitute full product performance or feature testing performed by

DevConnect members, nor is it to be construed as an endorsement by Avaya of the suitability or

completeness of a DevConnect member’s solution.

Bell Canada is a member of the Avaya DevConnect Service Provider Program. The general test

approach is to connect a simulated enterprise to the Vendor Validation Circuit through the

Internet and exercise the features and functionalities listed in Section Error! Reference source

not found..

2.1. Interoperability Compliance Testing

To verify Bell Canada SIP Trunking interoperability, the following features and functionalities

were covered during the compliance testing:

Incoming PSTN calls to various phone types including UNIStim, digital, and analog

telephones at the enterprise. All incoming calls from PSTN are routed to the enterprise

across the SIP Trunk from the service provider.

Outgoing PSTN calls from various phone types including UNIStim, digital, and analog

telephones at the enterprise. All outgoing calls to PSTN are routed from the enterprise

across the SIP Trunk to the service provider.

Incoming and outgoing PSTN calls to/ from PC 2050 softphones.

Dialing plans including local, long distance, international, outgoing toll-free, operator

assisted calls, local directory assistance (411) calls… etc.

1 2 3 4 5 6 7 8 ... 44 45

Comentarios a estos manuales

Sin comentarios

Avaya Bell Canada SIP Trunking Service with Business Communication Manager 450 Nota de aplicación Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Bell Canada SIP Trunking Service with Business Communication Manager 450