Avaya Bell Canada SIP Trunking Service with Business Communication Manager 450 Nota de aplicación descargar pdf (Pagina 13)

TD; Reviewed:

SPOC 3/15/2013

Solution & Interoperability Test Lab Application Notes

13 of 45

BCSIPTrkBCM

5.3. Administer the SIP Trunk

This section describes the steps for configuring the SIP Trunk on BCM450 connecting to Bell

Canada.

5.3.1. General IP Trunk settings

The system settings for IP Trunk can be configured by selecting Configuration  Resources 

IP Trunks  General. Under IP Trunking Settings tab, configure the Telephony Settings as

shown in the screenshot below.

Forward redirected OLI: First Redirect. In case of multiple call forwards, this setting

allows the Calling Party Name and Calling Party Number of the call party that firstly

redirects the calls.

Send name display: Checked. This setting enables the Calling Party Name and Calling

Party Number on the SIP Trunk.

Remote capacity MWI: Checked.

Ignore in-band DTMF in RTP: Unchecked. In the compliance testing, Bell Canada

supported the out-of-band DTMF. This setting, however, also allow in-band DTMF on

the SIP Trunk.

5.3.2. Administer Global

The global settings can be configured by selecting Configuration  Resources  IP Trunks

 SIP Trunking. Under SIP Trunking tab, configure the Global Settings as shown in the

screenshot below.

SIP Settings:

Local Domain: Enter the private SIP domain for the enterprise .e.g. bvwdev.com.

Call signaling port: Enter the port for SIP signaling .e.g. 5060.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 44 45

Sin comentarios

Avaya Bell Canada SIP Trunking Service with Business Communication Manager 450 Nota de aplicación Pagina 13