Avaya BCM50 Guía para resolver problemas descargar pdf (Pagina 18)

18 Chapter 3 Hardware Troubleshooting

NN40020-700NN40020-700

• BRIM LEDs on page 25

System status LEDs

The two system status LEDs on the BCM50 main units (BCM50, BCM50a, BCM50e, BCM50b,

BCM50ba, and BCM50be) show the current state of the BCM50 system.

You can view the system status LEDs on the faceplate and on the top of the main unit. See the

figure Location of system status LEDs on a main unit on page 18. The bottom LED is the power

LED, and the top LED is the status LED. Under normal operating conditions, both LEDs are solid

green.

Figure 1 Location of system status LEDs on a main unit

The table System status LEDs states and descriptions on page 18 describes the meaning of the

system status LEDs after the system boots up and is in service.

Table 1 System status LEDs states and descriptions

Power

Status

Description

Solid green Solid green Normal operation.

Solid green

Flashing green

Solid red A Major or Critical alarm is activated on the BCM50.

You must clear the status LED using the Element Manager Alarm Panel.

The LED does not clear itself.

See the Administration Guide for more information.

Flashing green Solid green Contact technical support.

Off Off No power to BCM50.

Power LED

Status LED

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 91 92

Sin comentarios

Avaya BCM50 Guía para resolver problemas Pagina 18