Avaya IP500 V2 Instrucciones de operaciones Pagina 277

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 442
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 276
Installing IP500/IP500 V2 Page 277
15-601042 Issue 28g (11 October 2013)IP Office 9.0
System Components: IP400 Expansion Modules
10.9.6 So8
The So8 module is used to add ETSI BRI S0-interface ports to the IP Office system. These ports can then be used for the
connection of ISDN devices.
Feature
Details
Supported on
All IP Office control units except Small Office Edition.
Locales
Supported in all IP Office locales .
Software Level
IP Office core software level 1.0 minimum. Bin file = nas0-16.bin.
Included
Power supply unit (see below) and Expansion Interconnect cable.
Power Supply
The unit is supplied with an earthed 3-Pin, 60W external power supply unit. The PSU has an
integral power cord for connection to the unit's DC I/P socket. A locale specific IEC60320 C13
power cord for the external PSU is required but is not supplied with the unit.
· Older units were supplied with a 2-Pin, 40W external power supply unit which used a locale
specific locale specific IEC60320 C7 power cord .
Mounting
The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be rack mounted in a 19" rack system using the optional IP400 Rack
Mounting Kit.
Dimensions
Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8"/2U.
Weight
Unboxed: 2.8Kg/6.3lbs. Boxed: 4.1Kg/9.2lbs.
Module Front
51
39
39
Vista de pagina 276
1 2 ... 272 273 274 275 276 277 278 279 280 281 282 ... 441 442

Comentarios a estos manuales

Sin comentarios