Avaya IP500 V2 Instrucciones de operaciones descargar pdf (Pagina 229)

Installing IP500/IP500 V2 Page 229

15-601042 Issue 28g (11 October 2013)IP Office 9.0

System Components: IP500 Base Cards

10.3.7 ETR6 Card

This card is used to add 6 ETR phone extension ports to an IP500 V2 control unit. This card is only supported by IP500

V2 systems running in IP Office Basic Edition - PARTNER® Mode or IP Office Basic Edition (Mu-Law) modes.

It also includes 2 analog extension ports which are for emergency use only when the card is fitted with an analog trunk

daughter card. A further 4 RJ45 ports (9 to 12) are provided for trunk connections when an IP500 trunk daughter card is

fitted to this card.

· Supports

ETR and analog phones. Each ETR phone can be used for an ETR or

analog phone. Support for ETR 34D phone is limited to a maximum

of 2 per ETR6 card and 4 in total.

· Paging to external paging equipment is not supported via ETR6

ports. It is supported via POT ports.

· The only analog phones tested by Avaya for IP500/IP500 V2 are

the Avaya 6200 Series. If other analog phones are used, it is the

customer's own responsibility to ensure that those phones work

as required.

· IP500 Control Unit:

· IP500 V2 Control Unit:

This card is only supported by IP500 V2 systems running in IP Office

Basic Edition - PARTNER® Mode or IP Office Basic Edition (Mu-Law)

modes. The card is not supported in other systems or if the system is

changed to A-Law operation.

· Maximum per Control Unit: 3.

· IP500 Trunk Card Support: 1.

The IP500 BRI trunk daughter card is not supported.

Port Type

Ports

Features

ETR

Extensions

1 to 6

· REN 1.

· DTMF dialing only.

· Message waiting indication 51V stepped.

· ICLID mode Bellcore 202.

LEDs

· No status LED are used for ETR ports.

· LED1 is also used for base card status:

· Red On = Error

· Red Slow Flash = Initializing.

· Red Flash every 5 seconds = Card okay.

· Red Fast Flash = System shutdown.

7 to 8

· If fitted with an IP500 Trunk Daughter card, during power failure both these ports are

connected to analog trunk port 12.

· Supports ICLID modes DTMFA, DTMFC, DTMFD, FSK and UK20.

· REN 2 (1 for external bell device).

· Off-Hook current: 25mA

· Ring Voltage: 40V.

· Intended for connection to two-wire analog phones, the ports do not include a ringing

capacitor. For connection to 4-wire analog phones, connection should be via a master

socket with ringing capacitors.

· No status LEDs are used for analog phone extensions.

Optional

Trunk Ports

9 to 12

Depends on the type of trunk daughter card fitted. The ETR6 can be fitted with either a

Analog Trunk card or PRI Trunk card.

LEDs

LED use depends on the type of daughter card installed on the base card:

· LED 9 is also used for daughter card status.

· Red On = Error

· Red Slow Flash = Initializing.

· Red Flash every 5 seconds = Card okay.

· Red Fast Flash = System shutdown.

Analog

Card

· Green on = V1: Card installed. V2: Line connected to the port but idle.

· Green flashing = Line in use.

PRI Card

· Off = No trunk present.

· Green on = Trunk present.

· Green flashing = Trunk in use.

236 239

1 2 ... 224 225 226 227 228 229 230 231 232 233 234 ... 441 442

Comentarios a estos manuales

Sin comentarios

Avaya IP500 V2 Instrucciones de operaciones Pagina 229

Comentarios a estos manuales

Relacionado con productos y manuales para Gateways / Controladores Avaya IP500 V2