Avaya BST Doorphone Guía de configuración descargar pdf (Pagina 9)

Chapter 2 DN configuration requirements for the BST Doorphone 9

BST Doorphone Installation and Configuration Guide

5 Four general record values must be reviewed for BST Doorphone compatibility. These

settings are shown in the following table. Use this table to change general record values (if

required) for the BST Doorphone.

6 Click on the Line access heading.

Figure 4 Line access screen example

Two line access fields must be reviewed for BST Doorphone compatibility. These setting are

shown in the following table. Use this table to change line access fields (if required) for the

BST Doorphone.

Table 2 Line access fields

Table 1 General record values

Attribute Value Description

Name <up to seven alphanumeric

characters>

Use this field to provide a more specific description of the BST

Doorphone, such as BackDR for Back Door.

Model M7324 This heading appears for telephones and peripherals in the digital

DN range, which starts at the start DN (default:221) up to DN 433.

Choose M7324 for the BST Doorphone.

Device port <port number> This read-only field shows the port number for the Set DN.

Remember this port number when you are installing the BST

Doorphone to a station module on the Business Communications

Manager system.

Control set None Set this value to None for the BST Doorphone.

Note: For a detailed explanation on all general record values, refer to the Business

Communications Manager Programming Operations Guide.

Attribute Values Description

Prime line I/C Ensure that the prime line value is set to I/C for the BST Doorphone.

Intercom (I/C)

keys

1 Assign only one intercom key to the BST Doorphone.

Note: For a detailed explanation on all line access fields, refer to the Business Communications

Manager Programming Operations Guide.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Sin comentarios

Avaya BST Doorphone Guía de configuración Pagina 9