Avaya BST Doorphone Guía de configuración descargar pdf (Pagina 15)

Chapter 3 BST Doorphone Installation 15

BST Doorphone Installation and Configuration Guide

Initialize a new BST Doorphone

To get the system to recognize a new BST Doorphone installation, you need to perform one of the

following:

• In the Unified Manager, click on System. Go to the top menu and click on View, then select

Refresh. The Unified Manager refreshes and the allows BST Doorphones to be recognized by

the system.

• In the Unified Manager, click on System. Go to the top menu and click on Logoff, then select

Reboot. The system reboots and brings BST Doorphones on line.

The BST Doorphone will identify itself to the system as a M7324 telephone.

Optional Equipment

The Door Opening Controller (DOC) operates through a BST Doorphone to provide door opening

control. The DOC receives data from the BST Doorphone, that is compared against a dip-switch

set code for activation.

The DOC provides convenient control of locked mechanisms but is not intended for sole building

entry security. In high security environments, backup systems should be used for added protection.

Power failure, device failure, wiring faults and unauthorized equipment access can all contribute to

a failed locked or unlocked situation.

For more information on the DOC, refer to documentation provided with the DOC unit.

Note: If you do a reboot, telephony services are temporarily unavailable

Note: The Call button’s backlight automatically turns on when the

BST Doorphone is connected to a station module port on the

system.

The backlight is useful in low light conditions.

✙

Call button

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Avaya BST Doorphone Guía de configuración Pagina 15