Avaya BST Doorphone Guía de configuración descargar pdf (Pagina 18)

18 Chapter 4 Configuring BST Doorphone settings

P1013654 01

3 Use the information in the following table to change the Doorphone settings.

Table 4 BST Doorphone settings

Setting Values Description

Doorphone state Active

Inactive

This read-only field indicates if the Doorphone is detected on

the system and is operational.

Doorphone DN <DN> This read-only field shows the DN assigned to this Doorphone.

Speaker volume Low

Medium

High

Assign a volume level for the Doorphone speaker.

Chime volume Low

Medium

High

Assign a volume level for chime tones played during a

Doorphone page.

Call Action Ring Set

Page

Both

Select a call activity when the Doorphone Call button is

pressed.

Ring Set: Calls an internal telephone.

Page: Sends a page tone to a specific group of telephones in a

page zone.

Both: Calls an internal telephone. If the call is not answered

after a set length of time, a page tone is sent to a specific

group of telephones in a page zone.

Target DN < any telephone DN> Enter the DN number of the internal telephone to call when the

Doorphone’s Call button is pressed.

Ring Delay 1 to 60 seconds Select a set length of time (in seconds) to allow ringing at the

Target DN before the call is automatically disconnected.

Page Target Internal

External

Both

Internal: Make a page announcement to a specific group of

telephones in a page zone, through the telephone speakers.

External: Make a page announcement through an external

loudspeaker system.

Both: Make a page announcement through telephone

speakers and an external loudspeaker system.

Page Zone Zone (1 to 6)

All

Assign Doorphone paging to one of six page zones.

Select All to assign Doorphone paging to all six page zones.

Chime Sequence 1 to 4

None

Custom

During a Doorphone page, a page tone will be heard followed

by the distinctive chime.

Select one of four standard distinctive chimes.

Select None to have no chimes presented during a Doorphone

page (only a page tone will be heard)

Select Custom for an unique chime setting. You must enter a

custom chime sequence in the Custom Chime setting.

Custom Chime < 0 to 8 digit string> Allows you to create your own chime tune using the following

parameters:

0 to 4 - chime tone (pitch) increases by number

5 = silence

Opener Type DOC

None

Allows you to specify if a Door Opening Controller (DOC) is

connected to the Doorphone.

1 2 ... 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios

Avaya BST Doorphone Guía de configuración Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta Avaya BST Doorphone