Avaya BST Doorphone Guía de configuración descargar pdf (Pagina 11)

Chapter 2 DN configuration requirements for the BST Doorphone 11

BST Doorphone Installation and Configuration Guide

Five capabilities fields must be reviewed for BST Doorphone compatibility. These capabilities

fields are shown in the following table. Use this table to change capabilities fields (if required)

for the BST Doorphone.

11 Click on the key beside Capabilities, then Click on Call forward.

Ensure that the two call forward fields (Fwd no answer to and Fwd on busy to) are blank

Figure 7 Call Forward screen example

12 Click on Hotline.

Ensure that the Hotline type is set to None.

Figure 8 Hotline screen example

13 Repeat the above steps for every BST Doorphone you plan to install on the system.

Table 3 Capabilities fields

Attribute Values Description

DND on busy N or Y Set this value to N (No) for the BST Doorphone.

Handsfree Auto

Standard

None

Set this value to Auto for the BST Doorphone.

Paging N or Y Set this value to Y (Yes) for the BST Doorphone.

Direct dial None Set this value to None for the BST Doorphone.

Aux ringer N or Y Set this value to N (No) for the BST Doorphone.

Note: For a detailed explanation on all capabilities fields, refer to the Business

Communications Manager Programming Operations Guide.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Sin comentarios

Avaya BST Doorphone Guía de configuración Pagina 11