Avaya Configuring Dial Services Manual de usuario Pagina 317

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 426
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 316
Dial Service Parameters
117353-A Rev. A A-47
Parameter: End Time
Path: Demand Circuits: Dialup > Demand Circuits > Demand Pools> PPP or FR
Circuits > PPP or FR Demand Circuits > Schedule > Circuit Time of Day
Schedule or Pool Availability List > Add > Circuit Time of Day Schedule
Backup Circuits: Dialup > Backup Circuits > PPP or Frame Relay > Primary
Circuit Definition or FR Primary Interface Definition> Schedule > Circuit
Time of Day Schedule > Add > Circuit Time of Day Schedule
Default: 2400
Options: 0 to 2400
Function: Specifies the time of day the demand or backup circuit is no longer available.
The router uses this parameter and the Start Time parameter to establish a time
period when the circuit is available. This value also specifies the time of day
that all secondary lines are deactivated if you set up bandwidth-on-demand
service for a PPP demand circuit.
Instructions: Enter an hour of the day, using the 24-hour-system of expressing time. For
example, to deactivate the circuit at 10:00 p.m., enter 2200.
For the router to deactivate the circuit at the configured end time, ensure that the
Availability Mode parameter is set to the default, Available. If you do not want
the router to deactivate the circuit at the end time, set the Availability Mode to
Not Available.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.4.11.1.6
Vista de pagina 316
1 2 ... 312 313 314 315 316 317 318 319 320 321 322 ... 425 426

Comentarios a estos manuales

Sin comentarios