Avaya Configuring Data Compression Services Manual de usuario descargar pdf (Pagina 68)

Configuring Data Compression Services

A-8

117352-B Rev. 00

Stac LZS Parameter

Use the following parameter description to enable Stac LZS compression.

Parameter: Engine Type

Path: Configuration Manager > Protocols > WCP > Interfaces

Default: Inherit from Line

Options: Software

Hardware

Inherit from Line

Function: Determines whether compression for this node will be software- or

hardware-based.

Instructions: Select Inherit from Line if you want to accept the value in effect for the WCP

Engine Type line parameter. Otherwise, select Software to use software-based

compression or select Hardware to use Hardware-based compression.

You can use hardware compression with PPP and frame relay only. You can use

software compression with PPP, frame relay, or X.25.

MIB Object ID: 1.3.6.1.4.1.18.3.4.22.2.1.6

Parameter: Enable

Path: Configuration Manager > Protocols > Stac LZS > Interfaces

Default: Enable

Options: Enable

Disable

Function: Enables or disables Stac LZS compression on this interface.

Instructions: Site Manager automatically sets this parameter to Enable when you select Stac

LZS as the compression protocol. If you want to temporarily disable Stac LZS

rather than delete it from the router, set this parameter to Disable. To reenable

Stac LZS, reset it to Enable.

MIB Object ID: 1.3.6.1.4.1.18.3.4.22.6.1.2

1 2 ... 63 64 65 66 67 68 69 70 71 72

Sin comentarios

Avaya Configuring Data Compression Services Manual de usuario Pagina 68