Avaya Configuring Data Compression Services Manual de usuario Pagina 24

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 72
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 23
Configuring Data Compression Services
1-6
117352-B Rev. 00
Enabling Compression for X.25
To enable WCP for an X.25 interface, you must first add an X.25 service record,
then enable compression for the X.25 interface. See Configuring X.25 Services for
information about X.25 service records.
To enable compression, complete the tasks in the following table:
Site Manager Procedure
You do this System responds
1. Click on the link or net module connector
for which you are enabling data
compression.
The Add circuit window opens.
2. Accept the default circuit name or rename
the circuit. Click on
OK
.
The WAN Protocols window opens.
3. Choose
X.25
then click on
OK
. The X.25 Packet Configuration window
opens.
4. Enter the required information then click
on
OK
.*
* Site Manager requires that you configure certain packet and service parameters. Refer to
Configuring X.25 Services
for information about these parameters.
The X.25 Service Configuration window
opens.
5. Click on
Add
. The X.25 Service Record window opens.
6. Enter the required information then click
on
OK
.
*
You return to the X.25 Service
Configuration window.
7. In the X.25 Service Configuration window,
choose
Protocols
.
The Protocols menu opens.
8. Choose
Add/Delete
. The Select Protocols window opens.
9. Scroll down the Select Protocols window
and choose
WCP
.
Site Manager enables compression on
this interface and then returns you to the
X.25 Service Configuration window.†
At the time you enable compression, you can also enable other protocols.
10. In the X.25 Service Configuration window,
select
Enable
for the
Enable
Compression
parameter.
Do this for each X.25 interface that you
configure.
Site Manager enables compression for
this interface.
11. Click on
Done
. You return to the Configuration Manager
window.
Vista de pagina 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 71 72

Comentarios a estos manuales

Sin comentarios