Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Manual de usuario descargar pdf (Pagina 323)

Site Manager Parameters

308627-14.20 Rev 00

A-61

Parameter: Hello Interval

Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Virtual Interfaces

Default: 15 seconds

Options: 1 to 65,535 seconds

Function: Indicates the number of seconds between the Hello packets that the router

sends on the interface. Nortel Networks suggests the following values for this

parameter: for broadcast, 10 seconds; for point-to-point, 15 seconds; for

NBMA, 20 seconds; for point-to-multipoint, 15 seconds.

Instructions: Either accept the default value of 15 seconds or set the Hello Interval parameter

to another value from 1 through 65,535 seconds. This value must be the same

for the virtual neighbor and for all routers attached to the same network.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.6.1.8

Parameter: Dead Interval

Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Virtual Interfaces

Default: 60 seconds

Options: 1 to 2,147,483,647 seconds

Function: Indicates the number of seconds that a router’s Hello packets have not been

seen before its neighbors declare the router down. This value should be a

multiple (usually 4) of the Hello interval. Nortel Networks suggests the

following values for this parameter: for broadcast, 40 seconds; for

point-to-point, 60 seconds; for NBMA, 80 seconds; for point-to-multipoint, 60

seconds.

Instructions: Either accept the default value of 60 seconds, or enter another value for this

parameter. This value must be the same for all routers attached to the same

network.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.6.1.9

1 2 ... 318 319 320 321 322 323 324 325 326 327 328 ... 389 390

Sin comentarios

Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Manual de usuario Pagina 323