Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Manual de usuario descargar pdf (Pagina 127)

100

101

Configuring and Customizing IP

308627-14.20 Rev 00

3-67

Using Site Manager

To specify the maximum length of time that advertised addresses are considered

valid by hosts, complete the following tasks:

Specifying Interface Preference

You can use the BCC or Site Manager to specify the preference value (a higher

number indicates more preferred) of the address as a default router address,

relative to other router addresses on the same subnet. The default value is 0.

Using the BCC

To specify the preference value of the address as a default router address, go to the

Router Discovery prompt on an IP interface (for example,

box; eth 2/2;

ip/2.2.2.2/255.255.0.0; rdisc

) and enter:

preference

integer

is the metric value.

For example, the following command sets the preference value to 1 on interface

2.2.2.2:

rdisc/2.2.2.2#

preference 1

rdisc/2.2.2.2#

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose Protocols.

The Protocols menu opens.

2. Choose IP. The IP menu opens.

3. Choose Router Discovery. The IP Router Discovery window opens.

4. Set the Lifetime parameter. Click on Help

or see the parameter description on page

A-34.

5. Click on Apply, and then click on Done. You return to the Configuration Manager

window.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 389 390

Comentarios a estos manuales

Sin comentarios

Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Manual de usuario Pagina 127

Comentarios a estos manuales

Relacionado con productos y manuales para Software Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services