Avaya Business Policy Switch 2000 Management Software Operations Software Version 2.0 Manual de usuario descargar pdf (Pagina 98)

98 Chapter 3 Configuring and graphing ports

209322-C

AdminStatus Current administrative state of the interface, which can be one of the

following:

• up

• down

When a managed system is initialized, all interfaces start with

AdminStatus in the down state. AdminStatus changes to the up state

(or remains in the down state) as a result of either management action

or the configuration information available to the managed system.

OperStatus Current operational state of the interface, which can be one of the

following:

• up

• down

• testing

If AdminStatus is up, then OperStatus should be up if the interface is

ready to transmit and receive network traffic. If AdminStatus is down,

then OperStatus should be down. It should remain in the down state if

and only if there is a fault that prevents it from going to the up state.

The testing state indicates that no operational packets can be passed.

LastChange Value of the time the interface entered its current operational state. If

the current state was entered prior to the last reinitialization of the local

network management subsystem, the value is zero.

Speed The estimate bandwidth of the interface in bits per second (bps). For

interfaces that do not vary in bandwidth or have no way to estimate the

bandwidth, this object should contain the nominal bandwidth. If the

bandwidth of the interface is greater than the maximum value reported

by the object, then the object displays its maximum value

(4,294,967,295). For a sub-layer that has no concept of bandwidth, the

object should be zero.

AutoNegotiate Indicates whether the port is enabled (checked) for autonegotiation or

not.

AdminDuplex The current administrative duplex mode of the port (half or full).

OperDuplex Indicate current duplex value of the port.

AdminSpeed Set the speed of a port: none, mbps10, and mbps100

OperSpeed The current operating speed of the port.

MltId The MultiLink Trunk to which the port is assigned (if any).

Table 36 Interface tab fields for multiple ports (continued)

Field Description

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 257 258

Sin comentarios

Avaya Business Policy Switch 2000 Management Software Operations Software Version 2.0 Manual de usuario Pagina 98