Avaya Business Policy Switch 2000 Management Software Operations Software Version 2.0 Manual de usuario descargar pdf (Pagina 89)

Chapter 3 Configuring and graphing ports 89

Reference for the Business Policy Switch 2000 Management Software Operations

VLAN tab for a single port

The VLAN tab allows you to view the VLAN membership for a single port.

To view the VLAN tab:

1 Select the port you want to edit.

2 Do one of the following:

• Double-click the selected port

• From the shortcut menu, choose Edit.

• From the Device Manager main menu, choose Edit > Port.

• On the toolbar, click Edit.

OperStatus The current operational state of the interface, which can be one of

the following:

• up

• down

• testing

If AdminStatus is up, then OperStatus should be up if the interface is

ready to transmit and receive network traffic. If AdminStatus is down,

then OperStatus should be down. It should remain in the down state

if and only if there is a fault that prevents it from going to the up state.

The testing state indicates that no operational packets can be

passed.

LastChange The value of sysUpTime at the time the interface entered its current

operational state. If the current state was entered prior to the last

reinitialization of the local network management subsystem, the

value is zero.

Speed The current speed of the port.

AutoNegotiate Indicates whether this port is enabled for autonegotiation or not.

AdminDuplex Sets the administrative duplex mode of the port (half or full).

OperDuplex Shows the current administrative duplex mode of the port (half or

full).

AdminSpeed Set the port’s speed.

OperSpeed The current operating speed of the port.

MltId The Multi-Link Trunk to which the port is assigned (if any).

Table 32 Interface tab items for a single port (continued)

Field Description

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 257 258

Sin comentarios

Avaya Business Policy Switch 2000 Management Software Operations Software Version 2.0 Manual de usuario Pagina 89