Avaya Business Policy Switch 2000 Management Software Operations Software Version 2.0 Manual de usuario Pagina 200

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 258
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 199
200 Chapter 8 Setting up bridging
209322-C
TopChanges Number of topology changes detected by this bridge
since the management entity was reset or initialized.
DesignatedRoot Bridge ID of the root of the spanning tree as determined
by the Spanning Tree Protocol. This is executed by the
node. This value is used as the Root ID parameter in all
configuration bridge PDUs originated by the node.
RootCost Cost of the path to the root as seen from this bridge.
RootPort Port number of the port that offers the lowest cost path
from this bridge to the root bridge.
MaxAge Maximum age of Spanning Tree Protocol information
learned from the network on any port before it is
discarded, in units of hundredths of a second. This is the
actual value that this bridge is currently using.
HelloTime Time between the transmission of Configuration bridge
PDUs by the node on any port when it is the root of the
spanning tree (in units of hundredths of a second). This is
the actual value that the bridge is currently using.
ForwardDelay Value (in hundredths of a second) that controls how fast a
port changes its spanning state when moving towards the
Forwarding state. The value determines how long the port
stays in each of the Listening and Learning states, that
precede the Forwarding state. The value is also used
when a topology change has been detected and is
underway. This ages all dynamic entries in the
Forwarding Database.
Note: This value is the one that this bridge is currently
using, in contrast to dot1dStpBridge ForwardDelay which
is the value that this bridge and all others would start
using if/when this bridge were to become the root.]
BridgeMaxAge Value that all bridges use for the maximum age of a
bridge when it is acting as the root.
Note: 802.1D-1990 specifies that the range is related to
the value of BridgeHelloTime. The granularity of this timer
is specified by 802.1D-1990 to be 1 second. A badValue
error may be returned if the value set is not a whole
number.
Table 80 Spanning Tree tab fields (continued)
Field Description
Vista de pagina 199
1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 257 258

Comentarios a estos manuales

Sin comentarios