Avaya Bay Dial VPN Networks Manual de usuario Pagina 118

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 206
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 117
Configuring and Troubleshooting Bay Dial VPN Services
8-2
308606-14.00 Rev 00
Configuring a Static Route and an Adjacent Host
A static route is a manually configured route that specifies a transmission path that
a packet must follow to another network. For Layer 3 tunnels, you configure a
static route between the CPE router on the remote users home network and the
gateway to restrict the paths that packets follow to the path you specifically
configure.
The network administrator of the remote users home network must configure a
static route between the CPE router on the home network and the Dial VPN
gateway to ensure that responses sent to the remote node reach their intended
recipient.
If the CPE router is a Nortel Networks router, it must also be configured with the
gateway as an adjacent host. Cisco routers use a different addressing scheme and
therefore do not require that you configure an adjacent host.
Figure 8-1
shows a simplified view of a Layer 3 Dial VPN network connection,
with a static route and an adjacent host configured between the CPE router and the
gateway and another static route configured between the CPE and the remote
node’s supernet.
Figure 8-1. Static Route Between the CPE Router and the Gateway
Tunnel
RAC
Gateway
BayDVS service
provider's network
DLCI = 101
DVS0008A
Frame relay
PVC
Remote
node
community
CPE
RADIUS
server
3.2.1.0
Home/
corporate LAN
1.1.1.2
Adjacent host/
next hop
3.1.1.0
"Supernet"
1.1.1.1
10.3.0.1
Static route
Static route
RADIUS
client
Service
provider
network
Vista de pagina 117
1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 205 206

Comentarios a estos manuales

Sin comentarios