Avaya RMON2 Manual de usuario descargar pdf (Pagina 67)

Ethernet DCM Parameters

300018-A Rev. 00

A-5

Parameter: RMON Max Host

Path: Configuration Manager > Platform > DCM 11.0 and later > Global > Base

Module DCM (or Expansion Module DCM)

Default: 500

Options: 100 to 8128

Function: Indicates the maximum number of host addresses to be collected in each entry

of the RMON host control table. The maximum limit depends on the amount of

flash memory available in the DCM. When the host control table reaches this

maximum value, the DCM deletes entries based on an LRU (least recently used)

algorithm.

Instructions: Recommended values, based on DCM memory configurations, are

-- 2 to 4 MB: 2048

-- 8 MB: 4096

-- 16 MB: 8128

To verify the number of configured hosts, check the MIB object

wfDCMmwRMONHost using the Site Manager Statistics tool

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.16.2.1.12

Parameter: RMON Default Host

Path: Configuration Manager > Platform > DCM 11.0 and later > Global > Base

Module DCM (or Expansion Module DCM)

Default: Disable

Options: Enable

Disable

Function: Specifies whether to create the RMON host control table at every boot. Some

RMON network management applications expect the DCM to set up a host

configuration; others enable and disable their own host configurations during

normal operations.

Note that the DCM allows only one instance of the host control table.

Instructions: Select Enable to create the RMON host control table at the next (and every

subsequent) reboot. Select Disable to disable default creation of the RMON host

control table at boot time.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.16.2.1.13

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 95 96

Sin comentarios

Avaya RMON2 Manual de usuario Pagina 67