Avaya Configuring RADIUS Services Manual de usuario Pagina 57

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 82
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 56
116752 Rev. A A-1
Appendix A
RADIUS Parameters
This appendix describes each of the RADIUS parameters. Each description
includes the path of Site Manager windows that you follow to find the parameter.
Each path assumes that you begin at the Configuration Manager window.
You can use Site Manager to modify all RADIUS parameters. You can also use the
Technician Interface to modify parameters by issuing
set and commit commands
with the Management Information Base (MIB) object ID. This process is the same
as modifying parameters using Site Manager. For information about using the
Technician Interface to access the MIB, refer to Using Technician Interface
Software.
Client IP Address Parameter
Caution: The Technician Interface does not verify that the value you enter for
a parameter is valid. Entering an invalid value can corrupt your configuration.
Parameter: Client IP Address
Path: Protocols > Global Protocols > RADIUS > Create RADIUS
or
Protocols > Global Protocols > RADIUS > Edit RADIUS
Default: None
Options: A 32-bit IP address
Function: Identifies the RADIUS client.
Instructions: Enter an IP address.
MIB Object ID: 1.3.6.1.4.1.18.3.5.22.1.1.5
Vista de pagina 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 81 82

Comentarios a estos manuales

Sin comentarios