
Configuring Frame Relay Services
A-2 114058 Rev. A
Parameter: Mgmnt Type
Path: Configuration Manager > Protocols > Frame Relay > Interfaces
Default: ANSI T1.617D
Options: DLCMI None
| Rev 1 LMI | ANSI T1.617D | CCITT Annex A |
LMI Switch | Annex D Switch | Annex A Switch
Function: Specifies the management protocol that the router and the Frame Relay network
use to communicate status information. Routers connected back to back also use
a management protocol to exchange status information.
DLCMI None provides no management interface between the router and the
Frame Relay network. In the absence of management support, you must
configure all PVCs manually.
Rev 1 LMI provides user-side management services as specified by Revision 1
of the Local Management Interface standard.
ANSI T1.617D provides user-side management services as specified in Annex
D to ANSI standard T1.617-1991.
CCITT Annex A provides user-side management services as specified by the
ITU-T (formerly CCITT).
LMI Switch offers limited management services for the DCE side of the
connection as specified by Revision 1 of the Local Management Interface
standard.
Annex D Switch provides limited management services for the DCE side of the
connection as specified in Annex D to ANSI standard T1.617-1991.
Annex A Switch provides limited management services for the DCE side of the
connection as specified by the ITU-T.
Instructions: Select the management protocol for the Frame Relay network. The LMI Switch,
Annex D Switch, and Annex A Switch options are primarily for
troubleshooting.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.1.1.6
Comentarios a estos manuales