Avaya Configuring Frame Relay Services Manual de usuario descargar pdf (Pagina 44)

Configuring Frame Relay Services

3-4 114058 Rev. A

Enabling Compression

To use data compression with Frame Relay, ﬁrst select WCP from the Protocols

menu, and make sure the Compression Control parameter is set to Enable.

Selecting a Management Type

You can specify the management protocol that the router and the Frame Relay

network use to communicate status information. Routers connected back to back

also use a management protocol to exchange status information. The following

list describes your options:

• DLCMI None provides no management interface between the router and the

Frame Relay network. In the absence of management support, you must

conﬁgure all PVCs manually.

• Rev 1 LMI provides user-side management services as speciﬁed by Revision 1

of the Local Management Interface standard.

• ANSI T1.617D provides user-side management services as speciﬁed in Annex

D to ANSI standard T1.617-1991. This is the default value.

• CCITT Annex A provides user-side management services as speciﬁed by the

ITU-T (formerly CCITT).

• LMI Switch offers limited management services for the DCE side of the

connection as speciﬁed by Revision 1 of the Local Management Interface

standard.

• Annex D Switch provides limited management services for the DCE side of

the connection as speciﬁed in Annex D to ANSI standard T1.617-1991.

• Annex A Switch provides limited management services for the DCE side of the

connection as speciﬁed by the ITU-T.

Site Manager Path: Select a link or net module. Select Frame Relay. The Select

Protocols window appears. Select WCP

Site Manager: Compression Control parameter: page A-11

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 67 68

Sin comentarios

Avaya Configuring Frame Relay Services Manual de usuario Pagina 44