Avaya Configuring ATM Half-Bridge Services Manual de usuario Pagina 70

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 94
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 69
Configuring ATM Half-Bridge Services
A-14
300017-A Rev. 00
BootP Preferred Server Configuration Parameters
The BOOTP Preferred Server Configuration window (Figure A-6) contains
parameters that allow you to specify the IP address of the relay agent on the router
and the IP address of the target server.
Figure A-6. BOOTP Preferred Server Configuration Window
The BootP preferred server configuration parameter descriptions follow.
Parameter: Relay Agent IP Address
Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface
Table > Pref Serv > Add
Default: None
Options: Any valid IP address
Function: Specifies the IP interface that receives DHCP packets from CPE hosts.
Instructions: Enter the IP address of a numbered network interface that you want to receive
DHCP packets from CPE hosts.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.3.1.3
Vista de pagina 69
1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 93 94

Comentarios a estos manuales

Sin comentarios