Avaya Configuring ATM Half-Bridge Services Manual de usuario descargar pdf (Pagina 41)

Starting AHB Services

300017-A Rev. 00

2-11

Site Manager requires that you specify input and output addresses to configure the

BootP relay agent on the AHB router. The input IP address is the ATM

unnumbered interface on which the DHCP request packet is received. The ATM

unnumbered interface address appears in the BootP Relay Agent table. Its last four

digits are 0.0.0<circuit_number>, where circuit number is the unnumbered circuit

that you configured.

The output IP address is the address of the local IP interface to which the DHCP

packets are forwarded.

To create a BootP relay agent forwarding table, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BootP

. The BOOTP menu opens.

4. Choose

Relay Agent Interface Table

. The BOOTP Relay Agent Interface Table

window opens, displaying the IP

interfaces that you configured on the AHB

router (ATM PVCs, circuitless IP

interface, and so forth).

5. Click on

Forward I/F

. The BOOTP Relay Agent Forwarding

Table window opens.

6. Click on

Add

. The BOOTP Addresses window opens.

7. Add a BootP forwarding entry by setting

the following parameters:

• Input IP Address

• Output IP Address

Click on Help or see the parameter

descriptions on A-11.

8. Click on

. The BOOTP Relay Agent Forwarding

Table window opens.

9. Click on

Done

. The BOOTP Relay Agent Interface Table

window opens.

10. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 93 94

Comentarios a estos manuales

Sin comentarios

Avaya Configuring ATM Half-Bridge Services Manual de usuario Pagina 41

Comentarios a estos manuales

Relacionado con productos y manuales para Manuales de software Avaya Configuring ATM Half-Bridge Services