Avaya Configuring ATM Half-Bridge Services Manual de usuario descargar pdf (Pagina 46)

Configuring ATM Half-Bridge Services

3-2

300017-A Rev. 00

To enable and disable AHB forwarding on the router, complete the following

tasks:

Setting the Auto Learn Method

You can determine the method by which AHB automatically learns new bridge

entries on the router by configuring the auto learning method. You can configure

AHB in one of the following learning modes:

•Secure

• Unsecure

•Both

•None

By default, the auto learn method is set to Both. This means that AHB will learn

new bridge entries either securely or unsecurely.

If you set the learning mode to Secure or Both, AHB learns new bridge entries

from the DHCP reply packets sent on the AHB-configured interface. Entries

learned in secure mode always take precedence over entries learned in unsecure

mode.

If you set the learning mode to Unsecure or Both, AHB learns new bridge entries

from IP and ARP packets received on the AHB-configured interface.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

AHB

. The AHB menu opens.

4. Choose

Global

. The Edit ATM Half-Bridge Global

Parameters window opens.

5. Set the

Enable

parameter. Click on Help

or see the parameter description in

Appendix A.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 93 94

Sin comentarios

Avaya Configuring ATM Half-Bridge Services Manual de usuario Pagina 46