Avaya Configuring ATM Half-Bridge Services Manual de usuario descargar pdf (Pagina 65)

AHB, BootP/DHCP, IP, and ATM Parameter Descriptions

300017-A Rev. 00

A-9

Parameter: Enable/Disable

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table

Default: Enable

Options: Enable

Disable

Function: Specifies whether BootP is active on the network interface.

Instructions: Select Enable to enable BootP on the network interface; select Disable to

disable BootP on the network interface.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.1.1.2

Parameter: Hops

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table

Default: 4

Options: 1 to 16 hops

Function: Specifies the maximum number of hops from the CPE host to the DHCP server.

A hop is the logical distance between two devices. If the value in the hops field

of a DHCP packet is greater than the number you specify for this parameter, the

router drops the packet.

Instructions: Accept the default of 4 hops or specify a number from 1 to 16.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.1.1.5

Parameter: Timeout Secs.

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table

Default: 0

Options: 0 to 65535 seconds

Function: Specifies the minimum number of seconds that the router waits before

forwarding a DHCP packet. If the value in the seconds field of a DHCP packet

is less than the value you specify for this parameter, the router drops the packet.

Instructions: Accept the default, 0, or specify a number from 1 to 65535.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.1.1.6

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 93 94

Sin comentarios

Avaya Configuring ATM Half-Bridge Services Manual de usuario Pagina 65