
Configuring ATM DXI Services
A-2 117375-A Rev. A
Interface Parameters
Parameter: VCI Number
Path: Configuration Manager > Protocols > ATM DXI > Interfaces
Default: None
Range: 32 through 65535
Function: Identifies the virtual channel of the PVC.
Instructions: How you set this parameter depends on how you set the DXI Mode parameter in
the ATM DXI Interface List window (refer to the DXI Mode parameter later in
this appendix). If you select Mode 1A (default) or 1B for the DXI Mode value,
enter a value from 32 through 63. If you select Mode 2 or Mode 2 Proprietary,
enter a value from 32 through 65535. Refer to Cha
pter 5 for more information.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.5.14.1.4
Parameter: Enable
Path: Configuration Manager > Protocols > ATM DXI > Interfaces
Default: Enable
Options: Enable
| Disable
Function: Enables or disables ATM DXI on the selected interface.
Instructions: Set to Disable if you want to disable ATM DXI for the selected interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.5.2.1.2
Parameter: Interface Description
Path: Configuration Manager > Protocols > ATM DXI > Interfaces
Default: None
Range: 1 through 63 alphanumeric characters
Function: Describes the selected ATM interface.
Instructions: Enter text to describe the destination or purpose of the interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.5.2.1.7
Comentarios a estos manuales