Avaya Configuring ATM DXI Services Manual de usuario Pagina 56

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 74
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 55
Configuring ATM DXI Services
5-2 117375-A Rev. A
Setting a VPI Number
The VPI number does not have a default setting. You must enter a valid VPI
number for each PVC you create. Depending on the DXI Mode you specify for
the interface, the range for the VPI number varies as follows:
Mode 1A or Mode 1B -- enter a value from 0 through 15.
Mode 2 or Mode 2 Proprietary -- enter a value from 0 through 255.
Setting a VCI Number
The VCI number does not have a default setting. You must enter a valid VCI
number for each PVC you create. Depending on the DXI Mode you specify for
the interface, the range for the VCI number varies as follows:
Mode 1A or Mode 1B -- enter a value from 32 through 63.
Mode 2 or Mode 2 Proprietary -- enter a value from 32 through 65535.
Enabling or Disabling a PVC
By default, you enable a PVC when you create it. However, you can enable or
disable a specific PVC at any time.
Appendix , “VPI Number
Appendix , “VCI Number
Appendix , “Enable
Vista de pagina 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 73 74

Comentarios a estos manuales

Sin comentarios