Avaya Configuring ATM DXI Services Manual de usuario Pagina 20

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 74
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 19
Configuring ATM DXI Services
1-2
117375-A Rev. A
Adding ATM DXI to the Router
Adding ATM DXI on a router requires
1. Cr
eating an ATM DXI Circuit
2. Enabling Protocols on an ATM DXI Circuit
3. Adding PVCs to an ATM DXI Circuit
To edit the ATM DXI Interface parameters, which define the ATM interface to the
physical line, refer to Cha
pter 4.
Creating an ATM DXI Circuit
To create an ATM DXI circuit on an interface:
1.
Select ATM DXI from the WAN Protocols window.
2.
Click on OK.
Site Manager creates the global framework for an ATM DXI circuit.
Enabling Protocols on an ATM DXI Circuit
To enable protocols on the ATM DXI circuit:
1.
Select the protocols you want to enable on this circuit from the Select
Protocols window.
2.
Click on OK.
For each protocol you select, the Configuration Manager displays a
protocol-specific window prompting you for required information. If you
need assistance in responding to any queries, consult the appropriate
configuration guide.
When you finish configuring the protocols, Site Manager displays the
Configuration Manager window.
Note:
The WAN Protocols window opens after you select a link or net module
connector that requires a WAN protocol.
Vista de pagina 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 73 74

Comentarios a estos manuales

Sin comentarios