Avaya BCM 4.0 LAN CTE Guía de configuración descargar pdf (Pagina 13)

LAN CTE Configuration Guide

Chapter 2

Configuring the BCM system and clients

You must configure the LAN CTE software on your BCM system if you are using Telephony

Application Programming Interface (TAPI) applications.

You must install the LAN CTE software on the client computers connecting to the BCM system to

run CTE applications. To run TAPI applications, you must install both LAN CTE and BCM TAPI

Service Provider (TSP) on the client computers.

LAN CTE and TSP do not require a Microsoft domain to function.

Entering the LAN CTE authorization code

Before you install the LAN CTE software on the client computers, you must enable the

authorization code for the application on the BCM. Refer to the Keycode Installation Guide for

more details.

Note: You may not need to configure the LAN CTE software on BCM if you are

using only CTE applications. This is an application-dependent requirement. Some

applications rely on the configuration to restrict access to certain telephones and

others do not. Refer to the application documentation for its specific requirements.

Note: For BCM 4.0, only one keycode is required for one or multiple

applications on the system. However, each application requires its own

authorization code.

Note: Each computer that uses LAN CTE and TAPI software is counted as a

LAN CTE Desktop. Therefore, you need one license per computer.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 26 27

Sin comentarios

Avaya BCM 4.0 LAN CTE Guía de configuración Pagina 13