Avaya Bay Command Console Manual de usuario descargar pdf (Pagina 81)

Configuring a Network Device

117383-B Rev. 00

4-9

Change the subnet mask to 255.255.255.224.

ip/192.168.133.114/255.255.255.0# mask 255.255.255.224

"mask" parameter may not be modified

ip/192.168.133.114/255.255.255.0#

You cannot modify any parameter values included in the BCC instance

identifier of a configured object, in this case,

ip/192.168.133.114/255.255.255.0. To change the value of any parameter that

is part of a BCC instance ID, you must first delete the object, then re-create it

with the desired parameter values. In this case, you must delete the IP

interface and then re-create it on ethernet/13/1, using the mask value of

255.255.255.224, as follows:

ip/192.168.133.114/255.255.255.0# delete

ethernet/13/1# ip 192.168.133.114/255.255.255.224

ip/192.168.133.114/255.255.255.224#

10.

Check to see what you can configure at this level.

ip/192.168.133.114/255.255.255.224# ?

Sub-Contexts:

arp igmp ospf rdisc rip

Parameters in Current Context:

address cost name

address-resolution end-station-support on

all-subnet-broadcast has proxy

assocaddr host-cache-aging redirects

broadcast mask state

cache-size mask-reply udp-checksum

configured-mac-address mtu-discovery

System Commands:

. . .

You can modify values currently assigned to parameters of

ip/192.168.133.114/255.255.255.224, or you can add RIP, OSPF, Router

Discovery, IGMP, or ARP to this interface.

11.

Add RIP as the routing protocol (by default, RIP1) on this interface.

ip/192.168.133.114/255.255.255.224# rip

rip/192.168.133.114#

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 119 120

Sin comentarios

Avaya Bay Command Console Manual de usuario Pagina 81