Avaya Bay Command Console Manual de usuario descargar pdf (Pagina 55)

Learning to Use the BCC Interface

117383-B Rev. 00

2-25

Displaying the Configuration of One Object

You can view objects configured within a specific part of the BCC configuration

tree by using the

show config

command or the

lso

command.

Example: (show config, BLN router)

You can use the

show config

command to view the configuration of a specific

configured object. Navigate to the object in configuration mode, and enter the

show config

command. The following BLN router example shows everything

configured on

ethernet/2/1:

box# eth 2/1

ethernet/2/1# show config

ethernet slot 2 connector 1

circuit-name E21-alpha

ip address 192.168.125.34 mask 255.255.255.224

broadcast 192.168.125.32

arp

back

rip

back

Example (lso)

You can enter

lso

in configuration mode to view any instances of objects

configured at your current location in the active device configuration, as follows:

ip/192.168.155.151/255.255.255.0# lso

arp/192.168.155.151/1 rip/192.168.155.151

Use the

lso

command if you have no need to display the contents of the current

object in full BCC configuration syntax.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 119 120

Sin comentarios

Avaya Bay Command Console Manual de usuario Pagina 55